MobiGater

however, what nature of this problem - PC, Linux or Mobigater?
I had try 4(FOUR!!!) different PC of different vendors - the same result.
there is nothing for it, but Linux or Mobigater is not working correct?
how to 'insert some pause' ?

What does means this strings in asterisk logfile with option debug all = yes in celliax.conf? it's going on every second many times. What to lock and unlock? translations does not give help
[Feb 12 17:13:38] DEBUG[3412] chan_celliax.c: rev 1099M[(nil)|b4e39b90][DEBUG_MONITORLOCKS 2106 ][none ][-1,-1,-1] going to unlock 0x4ccf170 (IFLOCK)
[Feb 12 17:13:38] DEBUG[3412] chan_celliax.c: rev 1099M[(nil)|b4e39b90][DEBUG_MONITORLOCKS 2106 ][none ][-1,-1,-1] unlocked 0x4ccf170 (IFLOCK)
[Feb 12 17:13:38] DEBUG[3529] celliax_additional.c: rev 1099M[0x84190f8|b4d49b90][DEBUG_LOCKS 1523 ][mobigater1][ 6, 6,300] going to unlock 0xb6e80354 (CONTROLDEV_LOCK)
[Feb 12 17:13:38] DEBUG[3529] celliax_additional.c: rev 1099M[0x84190f8|b4d49b90][DEBUG_LOCKS 1523 ][mobigater1][ 6, 6,300] unlocked 0xb6e80354 (CONTROLDEV_LOCK)
[Feb 12 17:13:38] DEBUG[3529] celliax_additional.c: rev 1099M[0x84190f8|b4d49b90][DEBUG_LOCKS 490 ][mobigater1][ 6, 6,300] going to lock 0xb6e80354 (CONTROLDEV_LOCK)
[Feb 12 17:13:38] DEBUG[3529] celliax_additional.c: rev 1099M[0x84190f8|b4d49b90][DEBUG_LOCKS 490 ][mobigater1][ 6, 6,300] locked 0xb6e80354 (CONTROLDEV_LOCK)
[Feb 12 17:13:38] DEBUG[3411] chan_celliax.c: rev 1099M[(nil)|b4e75b90][DEBUG_MONITORLOCKS 1991 ][none ][-1,-1,-1] going to lock 0x4ccf170 (IFLOCK)
[Feb 12 17:13:38] DEBUG[3411] chan_celliax.c: rev 1099M[(nil)|b4e75b90][DEBUG_MONITORLOCKS 1991 ][none ][-1,-1,-1] locked 0x4ccf170 (IFLOCK)
[Feb 12 17:13:38] DEBUG[3411] celliax_additional.c: rev 1099M[(nil)|b4e75b90][DEBUG_LOCKS 490 ][mobigater4][-1, 0, 0] going to lock 0xb58f7354 (CONTROLDEV_LOCK)
[Feb 12 17:13:38] DEBUG[3411] celliax_additional.c: rev 1099M[(nil)|b4e75b90][DEBUG_LOCKS 490 ][mobigater4][-1, 0, 0] locked 0xb58f7354 (CONTROLDEV_LOCK)
Where can i read about decoding of debug messages?

---

And very troublesome:S4 stop work after few time - i make a calls to inserted sim-cards from some mobile phone, hear ring back tone, but nothing happens more. Asterisk extension, that was ringing and i had conversation 30 miutes before, keeps silence. Work can be restored after reboot of server. But i can't guarantee for my client, how long time it will work then.
What i'm doing wrong?

If you insist, that this nice device is working good, please, betray a secret, which one linux you use for testing it during pre selling prepare?(i hope you do it?)
I use CentOS - it,s recommended in this book http://www.asteriskdocs.org/

My S4 has been sitting idle for a couple of months now. Hoping it'll work with Asterisk and Celliax, I studied a little Linux and Asterisk. What's weird is, I still can't make it work. Now, I am looking for a 'friend' (some expert on Linux and Asterisk specifically for the S4, I guess) to help me sort things out, as the Technical person from MObigater recommends. I'd pay for whatever services rendered. Thank you.

For CristinaMP
You really can make it work yourself. You only need to do punctually this instructions http://www.celliax.org/node/504
It will work.(but with one condition - if your Linux will see S4 as USB device)
But how long time it will work and how dependable - nobody can guarantee.

P.S.
Don't need payment

I also encountered this error: WARNING 6314 ][m01 ][-1, 0, 0, 0] |+CSQ: 10,0| CELLPHONE GETS ALMOST NO SIGNAL, consider to move it or additional antenna. I don't know what is the possible cause of this error.

_________________
Ip pbx